The shaft measurement solution is tailored to measure the surface finish and contour on a wide range of the shaft-type parts, including camshafts, crankshafts, e-mobility rotor shafts, transmission shafts, ball screws, and more. Leveraging the advanced capabilities of the SV-M3000CNC, this solution automates the measurement process from program selection and measurement execution to data output.
Features & Benefits
- Flexible Shaft Fixture – The flexible shaft fixture is designed to accommodate various shafts, including camshafts, crankshafts, ball screws, and more.
- Maximized Inspection Speed – The sturdy structure of the X, Y, and Z axes allows traverse speeds of up to 7.78”/s (200 mm/sec). This high-speed positioning helps reduce overall cycle time.
- Automated Data – FormTracePak generates raw data, plots, and PDF reports after measurement. Additionally, the Universal Interface (UI) further automates operations from scanning part information, running programs, and outputting results, including SPC data compliant with AQDEF standards.
- Day-one Ready – Mitutoyo’s available services, including part programming, training, installation, calibration, and maintenance, ensure that the equipment is fully operational and ready to run immediately after installation.
Learn More
Function
Base Model | SV-M3000CNC (P/N 178-549-1)
|
▶ X, Y & Z axes |
Measuring range |
X: 7.78” (200) Y: 19.7” (800) Z: 31.5” (500) (mm) |
|
Resolution |
0.05 um |
|
|
Drive speed |
CNC: 7.78“/s (200 mm/s) J/S mode: 0 – 1.97”/s (0 – 60 mm/s) |
|
|
Measuring speed |
Up to 0.08”/s (2 mm/s) |
|
| System Noise Rz*1 |
X up/down: < 0.2 um X front/back: < 0.4 um |
|
|
▶ A-Axis |
Inclination angle |
– 45 to + 10 degrees |
|
Resolution |
0.000225 degrees |
|
|
▶ B-Axis |
Inclination angle |
+ 90, 0, -90, and -180 degrees |
|
▶ Theta 1 |
Resolution |
0.004 degrees |
|
▶ Dimension |
W x D x H |
42.7” x 66.7” x 75.7” (1085 x 1695 x 1922 mm) |
*1 When using rotary type detector head
Fixture | Flexible Shaft Holder
|
▶ Max. part length |
24” (625 mm) |
|
▶ Max. part weight |
To be determined with part prints |
† Customized Fixture is available upon request.