The LSM-CU-A is a compact, modular industrial controller unit specifically designed for use with the LSM-02-A and LSM-30-A Laser Scan Micrometers. Built for seamless integration, its slim design is DIN rail compatible and operates on a reliable DC+24 V power supply. This versatile controller includes essential connectivity like USB Type-C and I/O ports, with optional industrial interfaces available. Configuration is made easy with the included software, making the LSM-CU-A an efficient hub for your precision non-contact measurement system.
Features & Benefits
The LSM-CU-A is a compact, DIN rail compatible industrial controller for LSM-series micrometers, offering modular design, USB Type-C/I/O connectivity, and configuration software.
• Compact, thin design to fit seamlessly into distribution boards or equipment.
• Entire unit, including the cable, can be stored within a 100 mm deep distribution board.
• Tool-free mounting on a DIN rail.
• Equipped with USB Type-C, I/O ports, and optional industrial interfaces.
• Standard configuration software included for user-friendly setup.
• Unit can be rotated 90 degrees for flexible layout options.
Function
Specifications
| Order No. |
544-121 (mm/inch switchable type)
|
|
| Model |
LSM-CU-A
|
|
| Measuring functions *¹ | Segment mode |
1 to 7 (1 to 3, transparent)
|
| Edge mode |
1 to 255
|
|
| Averaging method |
Arithmetic average: from 1 to 2048, Moving average: from 32 to 2048
|
|
| Functions |
Transparent object measurement, Ultra-fine wire mode (LSM-02-A only), Simultaneous measurement of two items, Automatic workpiece detection, Outlier elimination, Judgment (lower limit/upper limit, multi-limit tolerance zone, target value and tolerance value), Dirt detection for protective glass, Sample measurement, Analog output, Parameter setting (Measurement condition: 20, Workpiece position, Calibration, Presetting, Offset, Statistical analysis, Calculation of two or more sets, Sensor model identification
|
|
| Indicator |
[POWER] LED (green), [ERROR] LED (red)
|
|
| Standard I/F | Signal cable connector |
Mini D-Sub (15 pins)
|
| USB connector |
Type-C
|
|
| I/O connector |
Separate terminal block (18 pins)
|
|
| Power supply connector |
Separate terminal block (6 pins)
|
|
| Power supply |
DC±24 V±10%, 3.0 A or more *²
|
|
| Operating temperature |
Temperature: 0 °C to 50 °C, Humidity: 20 %RH to 80 %RH (non-condensing), Altitude: 2000 m or less
|
|
| Storage temperature |
Temperature: -10 °C to 60 °C, Humidity: 20 %RH to 80 %RH (non-condensing)
|
|
| Mass |
Approx. 550 g
|
|
| CE Marking/UKCA Marking |
EMC Directive: EN IEC 61326-1, Immunity test requirements: Class 6.2 Table 2, Emission limit: Class A, RoHS Directive: EN IEC 63000
|
|
| Standard accessory |
Socket for I/O terminal block: D800-396, Socket for power supply terminal block: D827-827, Grounding wire (4 m): 02QAG068, CD (LSMPAK installer, User’s Manual): 02NGA070
|
|
*¹ Each function has its combination limit.
*² Ensure the use of an AC adapter/switching power supply with an output of at least ±24 V/3.0 A.
Reference: AC adapter: Signcomplex/AC adapter 24V/3A DC Port diameter 5.5×2.1 mm, Power supply connector: KAUMO Co.,Ltd./Power supply connector O.D. 5.5 mm I.D. 2.1 mm, Switching power supply: OMRON Corporation/OMRON S8VS-12024